How to solve an AP Chemistry question that stumped most test-takers

AP exams chemistry
By Sandra

On average students scored 3.88/10 points on this question while only 1% of students got a perfect score. In this question, students are expected to know how to analyze the experimental data that is given and show an understanding of thermodynamics.

The Question

Sandra_1.png

Ethene, C2H4(g) (molar mass 28.1 g/mol), may be prepared by the dehydration of ethanol, C2H5OH(g) (molar mass 46.1 g/mol), using a solid catalyst. A setup for the lab synthesis is shown in the diagram above. The equation for the dehydration reaction is given below.

Sandra_2.png

A student added a 0.200 g sample of C2H5OH(l) to a test tube using the setup shown above. The student heated the test tube gently with a Bunsen burner until all of the C H OH(l) 2 5 evaporated and gas generation stopped. When the reaction stopped, the volume of collected gas was 0.0854 L at 0.822 atm and 305 K. (The vapor pressure of water at 305 K is 35.7 torr.)

(a) Calculate the number of moles of C2H4(g)

  • (i) that are actually produced in the experiment and measured in the gas collection tube and
  • (ii) that would be produced if the dehydration reaction went to completion. 

(b) Calculate the percent yield of C2H4(g) in the experiment.

Because the dehydration reaction is not observed to occur at 298 K, the student claims that the reaction has an equilibrium constant less than 1.00 at 298 K.

(c) Do the thermodynamic data for the reaction support the student’s claim? Justify your answer, including a calculation of DG298 D for the reaction.

(d) The Lewis electron-dot diagram for C2H4 is shown below in the box on the left. In the box on the right, complete the Lewis electron-dot diagram for C2H5OH by drawing in all of the electron pairs.

Sandra_3.png

(e) What is the approximate value of the C–O–H bond angle in the ethanol molecule? 

(f) During the dehydration experiment, C2H4(g) and unreacted C2H5OH(g) passed through the tube into the water. The C2H4 was quantitatively collected as a gas, but the unreacted C2H5OH was not. Explain this observation in terms of the intermolecular forces between water and each of the two gases.

The Solution

First, quickly read through the question and get an idea of on what you are being tested. Underline values that are given! Notice that both the standard enthalpy change of reaction(ΔH°298) and standard entropy of reaction  (ΔS°298) are given in different units. They are also given at standard temperature and pressure. During the test make sure to convert all measurements into the correct units before doing calculations and get in the habit of writing out the units in the answer!

Part (a)

Now, let’s work through (a) which asks for (i) the moles actually produced in the experiment (ie. experimental yield) and (ii) the moles that would be produced if the reaction went to completion (ie. theoretical yield). Before hand, remember to clearly label your work and answers for section (a)(i) vs (a)(ii). Points are not given for correct answers in the wrong section. Recognize that we need the equation PV=nRT from the equation table where n represents the moles and to solve for moles the equation becomes n=PV/RT. The question gives us the volume of gas collected, 0.0854L, total pressure, 0.822 atm, and temperature, 305K. Notice that the total pressure is given but we need the pressure of ethene. Given the equation Ptotal = Pwater + Pethene  from the equation table we can solve for Pethene. However, we first need to convert Pwater into the correct units, atm. Given Pwater = 35.7 torr and 1atm = 760 torr using division we can cancel the units and get Pwater = 0.0470atm. Remember the significant figures here. Solving for Pethene = Ptotal – Pwater = 0.822atm – 0.0470 atm = 0.775atm. Using this pressure and the equation n=PV/RT = (0.775 atm)(0.0854 L)/ (0.08206 L atm mol-1 K-1) ( 305 K) = 0.00264 mol. Make sure to write in all the units and make sure they cancel out to leave moles! For (a)(ii), which asks for the theoretical yield of moles if the reaction went to completion make sure the equation is balanced. Since in this case the equation is already balanced we see that 1mol C2H5OH will yield 1 mol of C2H4 thus calculate the moles of C2H5OH given the amount of grams initially used.

Sandra_4.png

Part (b)

Part (b) wants you to use the experimental yield and theoretical yield and calculate the percent yield. Many students calculated the percent error here but remember that the percent yield = actual yield/theoretical yield x 100. Percent error is not the same as percent yield so be careful! Using this equation 0.00264 mol/0.00434 mol x 100 = 60.8%. Since we are representing the percent yield there is no need to convert moles to grams. Also, to check your answer make sure that the percent yield is not more than 100% since it doesn’t make sense to yield more than the theoretical amount possible.

Part(c)

Part (c) requires that you know how to calculate ΔG° of the reaction using the equation ΔG°= ΔH°-TΔS° that is given on the equation sheet and determine the equilibrium constant for gas pressure, Kp, from this equation. First let’s calculate ΔG° at 298K like the question requires. Note that ΔH° and ΔS° are already given at 298K but in different units. Convert the units of ΔS° to kJ by diving by 1000 since 1J = 1000kJ. Thus,

Sandra_6.png

The student claims the reaction has an equilibrium constant less than 1.00 at 298K. To determine whether this is true let’s use the equation give from the equation sheet that includes both ΔG° and Kp, which is ΔG°= -RT ln Kp. Solving for Kp we get Kp= e(-ΔG°/RT) < 1. So, yes the data supports the students claim because a ΔG° > 0 results in a Kp < 1.

Part (d)

Part (d) can be answered without any calculation. For (d) you are expected to know how to draw Lewis structures which are based on valence electrons. Remember that for neutral atoms the group number is equal to the number of valence electrons. Thus Carbon has 4 valence electrons, Oxygen has 6, and Hydrogen has 1 valence electron, which gives 20 valence electrons that need to be represented in the dot structure. Begin by drawing two dots between each atom to represent a chemical bond. By doing this you will use 16 valence electrons and satisfy the octet rule for both carbons but 4 electrons are left and the octet for oxygen is not satisfied. Thus those 4 electrons go around the oxygen and represent two lone pairs, so the diagram looks like this:

Sandra_7.pngPart (e)

Part (e) asks you to give the bond angle between the C-O-H in this molecule. Due to the lone pairs present around the oxygen this bond makes a tetrahedral like angle, which is approximately 109°. However, the scorers gave 1 point for any bond angle between 100° - 115°. 

Sandra_8.png

This question required knowledge about VSEPR models but required no justification to receive points. 

Part (f)

This part wants you to show an understanding of the intermolecular forces between ethene and water and ethanol and water.  Ethene, which is a nonpolar molecule, is only slightly soluble in water because of the weak dipole/induced dipole forces of nonpolar molecules. Ethanol, however, is soluble in water because they are polar and form hydrogen bonds with the water molecules as they dissolve.

Using this question as a study guide I would advise you to review the following:

Always remember to show your work, label each part of the question correctly, use significant figures, and watch the units!

Comments

topicTopics
academics study skills MCAT medical school admissions SAT expository writing college admissions English MD/PhD admissions strategy writing LSAT GMAT GRE physics chemistry math biology graduate admissions academic advice ACT interview prep law school admissions test anxiety language learning premed MBA admissions career advice personal statements homework help AP exams creative writing MD study schedules test prep computer science Common Application summer activities history mathematics philosophy organic chemistry secondary applications economics supplements research 1L PSAT admissions coaching grammar law psychology statistics & probability legal studies ESL CARS SSAT covid-19 dental admissions logic games reading comprehension engineering USMLE calculus PhD admissions Spanish mentorship parents Latin biochemistry case coaching verbal reasoning DAT English literature STEM excel medical school political science skills AMCAS French Linguistics MBA coursework Tutoring Approaches academic integrity chinese letters of recommendation Anki DO Social Advocacy admissions advice algebra art history artificial intelligence astrophysics business cell biology classics diversity statement gap year genetics geometry kinematics linear algebra mechanical engineering mental health presentations quantitative reasoning study abroad technical interviews time management work and activities 2L DMD IB exams ISEE MD/PhD programs Sentence Correction adjusting to college algorithms amino acids analysis essay athletics business skills careers cold emails data science dental school finance first generation student functions graphing information sessions international students internships logic networking poetry resume revising science social sciences software engineering tech industry trigonometry writer's block 3L AAMC Academic Interest EMT FlexMed Fourier Series Greek Health Professional Shortage Area Italian Lagrange multipliers London MD vs PhD MMI Montessori National Health Service Corps Pythagorean Theorem Python Shakespeare Step 2 TMDSAS Taylor Series Truss Analysis Zoom acids and bases active learning architecture argumentative writing art art and design schools art portfolios bacteriology bibliographies biomedicine brain teaser campus visits cantonese capacitors capital markets central limit theorem centrifugal force chemical engineering chess chromatography class participation climate change clinical experience community service constitutional law consulting cover letters curriculum dementia demonstrated interest dimensional analysis distance learning econometrics electric engineering electricity and magnetism escape velocity evolution executive function freewriting genomics harmonics health policy history of medicine history of science hybrid vehicles hydrophobic effect ideal gas law immunology induction infinite institutional actions integrated reasoning intermolecular forces intern investing investment banking lab reports linear maps mandarin chinese matrices mba medical physics meiosis microeconomics mitosis mnemonics music music theory nervous system neurology neuroscience object-oriented programming office hours operating systems

Related Content